Home & Garden

A Step-by-step Guide on How to Clear Your Yard From Weeds and Brush

Even how common it is, many of us are still surprised by how fast brush and weeds grow. One moment everything looks seamless, and the next thing you know, your perfect yard has transformed into a jungle. Clearing up an overgrown yard is not as simple as it seems. However, if you follow a methodical approach, then you’ll be more surprised by the results.

There are two ways to get rid of these annoying elements. One way is to get rid of them through the use of herbicides and chemicals. If you choose this approach, you must be careful when reading the labels. Also, make sure to follow all the instructions properly. The second approach is the natural way if you don’t like using chemicals. Of course, you must have enough time to finish the job.

Prepare Clearing Up Your Overgrown Property

Inspect Your Land

When building a home, you always have a solid plan and some blueprints. Clearing your overgrown yard should not be any different. Well, you don’t really need an entire map of your area. However, you must survey your yard and find the most ideal approach to clean your yard and get rid of weeds and bushes.

Label the trees you want to get rid of and remember areas that look especially thick. If you do have so many trees to remove, then it’s a good idea to have the right equipment for either tree pruning or removal.    good example is a log splitter. It splits the wood into smaller pieces so you can make use of the smaller pieces for other purposes, such as firewood. Operating such equipment must assure your safety. One way to do that is to find a good woods log splitter supplier.

See If You Require a Permit

Depending on your location, you might need to secure a permit to clear brushes in your property. There are various reasons for this but most of the time, it is because you might need a dumpster if you choose to remove an entire tree.

Plan for Proper Disposal

If you have a huge cleaning project, then it’s likely that your regular trash collection cannot handle it. You might want to consider other methods, such as renting a waste dumpster or as mentioned above, getting a high-quality log splitter so you can dispose the wood pieces easily and properly.

Prepare Your Tools and Equipment

Alongside your strong plan, you must have the right tools and equipment to clear your yard properly. There are a variety of tools and equipment that are useful for your project. Here are some excellent examples:

  • Shovel
  • Axe
  • Tree pruner
  • Rake
  • Machete
  • Chainsaw
  • Log splitter
  • Stump grinder
  • Wheelbarrow
  • Weed wacker

And of course, you need to have enough protection:

  • Gloves
  • Eye protection
  • Long-sleeved shirts
  • Pants
  • Helmet
  • Durable trash bags

Important Reminder: If you are not knowledgeable or comfortable in using the power tools, then it’s better to have someone who will. It’s even recommended to hire services. This is to prevent any serious injuries from happening to you.

Three Steps to Clean Brush and Weeds

Now that you have a gameplan and have prepared all the tools, it’s time to start working! Here are the three steps you must follow to ensure you are doing the project properly.

Step 1: Cut the Trees Down

Remember the trees that you have labeled to cut? This is your last chance to change whatever your original plan was. If you have second thoughts about cutting certain trees, you must make that decision now. You can either go with it or change your mind. If you have made your decision, this is the proper way of cutting trees:

For small tree removal:

  1. Label the trunk about a foot from the ground.
  2. With a chainsaw or ax, cut at a 45-degree angle on one side until you are about ⅓ through the tree trunk. You must cut on the side where you want the tree to fall.
  3. Now, cut a 45-degree angle wedge on the opposite side. This must be a bit higher than the cut on the first side. This cut needs to be halfway across the tree trunk.
  4. From the side where you have done the second cut, push the tree. If it doesn’t fall, continue to cut using a bow saw until the tree starts falling.
  5. Repeat the process Fort Worth tree experts for tree removal on the other trees you wish to get rid of.

Step 2: Clean the Undergrowth

Once you have removed the large stuff, it’s time to remove the thick ones. You must now remove weeds, tall grass, vines, and small shrubbery. You can use various tools for this, such as a machete, weed wacker, and tree pruner.

Thinning Out the Brushes

  1. Get rid of shrubs by pulling them or trimming them using a pruner.
  2. Use a shovel to remove stumps and roots.
  3. Cut brambles and thick vines with a tree pruner.
  4. For larger weeds, you can simply pull them out.

Step 3: Final Clean Up

After getting rid of everything that needs to be removed, you must perform one final step. This step requires you to clean up all the mess and debris and dispose them properly. For faster cleaning, you can use a rake to gather everything in one place. 

There are many ways to properly dispose the piles in your yard. You can use them to make compost or you can completely dispose of them through renting a dumpster or keeping them in a sturdy trash bag and wait for your regular trash collection. Find The Local Tree Expert in your area.

For more information on instant turf in Melbourne check out Lilydale Instant lawn

You Might Also Like